The One Secret to Making Wooden Rings that People Will Actually Wear

brian forbes westfarthing woodworks author biography about me experience

Wooden rings need to fit well. If you only get one thing right when you make a ring, it needs to be the fit. No matter how beautiful the ring, a person will stop wearing it when the fit is not right. Here is how you can prevent that.

The Book Store is Now Open!   Happy Building!

Making Wooden Rings

the-one-secret-to-making-wooden-rings-that-people-will-actually-wearWooden rings are very popular, and they are also easy to make. This means that just about anyone can make them. The real secret is making them fit.

Fitting a ring is more than just drilling a hole. There are refinements that you need to make to the fit, and they will make the ring more comfortable to wear.

After all, if a ring is too loose, it can fall off and break. It can also fall off and the person might not know it happened and lose the ring. If the fit is too tight, it can be uncomfortable, and get stuck if their hand swells a little.

All of these are bad for your ring, because even the best ring in the world will end up in a drawer if the fit is poor. Here area few ways that you can save your rings from this fate.

See Also: 25 Gorgeous Wood Species for Making Wooden Rings

Free Woodworking Tips Delivered Every Monday! Add Me to the List!

Drill as Close as You Can to the Final Size

It all starts with the drill. When you drill your ring, make sure that you drill with the closest possible drill bit to the ring size. Make sure that you stay under final size though, and if you have to split the difference, always choose the bit that is a little smaller.

The reason you can’t go better and make it work is because you can’t put wood back. Once it’s gone, it’s gone. If you over drill the ring, and the opening is too big, you might be able to glue in a piece of veneer, but that will still add time to the build.

The reason that you want to drill as close as you can is because sanding the inside of the ring is a pain sometimes. The closer you are, the more likely that you will complete the process without letting it stop you too early from frustration.

See Also: Why a Wooden Ring is an Amazing Gift and How You Can Make One

Sand the Inside to Widen the Opening

The way to widen out the ring opening is to sand it. You can do this by hand, or you can do it with a sanding drum or Dremel tool. Either way, the point of sanding is to sneak up on the actual finger size for the ring.

It’s easiest to do this process with a mandrel, or some other reference for the needed size. A half a millimeter is hard to see, and even harder to mark on the ring. You need to have a ring sizing mandrel to measure the right fit.

Sand the inside of the ring, and test it on the mandrel. Do this often. It’s much better to burn a little time testing too often than it is to sand right through your target size and make the ring too big on accident.

Free Woodworking Tips Delivered Every Monday! Add Me to the List!

See Also: 35 Important Tips on How to Make a Ring

Sand a Comfort Fit to Open Up the Size

If you are really close, and your customer just wants the ring to be a pinch looser, you can sand a comfort fit instead of sanding everything. A comfort fit is just rounding the inside edges of the finger opening so that they meet the outside faces of the ring in more of a graceful bend rather than a ninety degree angle.

Look at a comfort fit ring, and you will see that the inside opening is not flat. The middle of the ring is the actual size of the drill, and the two edges are rounded over, which in effect makes thee areas wider than the ring size.

On rings, a comfort fit style makes a smaller ring fit on a bigger finger. Most comfort fit rings run half a size smaller, so if you are a 10 normally, you re a 9.5 in a comfort fit. This is an easy way to open up a ring a little bit, and make the fit feel more comfortable.

See Also: Why You Should Make a Bigger Ring Blank

Have the Customer do a Test Fit

If you are selling your rings one at a time, arrange a meeting for a test fitting. Customers love individual attention like this, and it shows then you care about their happiness. It also gives you access to the exact finger that you have to impress.

The Book Store is Now Open!   Happy Building!

When you test fit the ring, bring a few more with you of different sizes. Try the actual ring, and ask a lot of questions. Make sure that you get from the customer their exact thoughts, and how they feel about the ring.

If the ring needs to be smaller, you can add some veneer and try again. If it needs to be bigger, you can sand the ring and taper the inside edges on both sides, and try the fit again. If you are really close, you might be able to get the fit perfect right at that meeting.

Once you have their approval, bring the ring back to the shop for the final touches. It’s important that the ring be as close to final size when you do the test fit though. This is because you want the feel to be as close to normal as possible. This way, they won’t feel something different when you drop off the final product.

See Also: The Best Drill for Making Wooden Rings

Your Homework

Your homework is to get serious about fitting your rings. If you are the kind of woodworker that drills the rings with a few bits and leaves them alone, try a custom fitting. It will challenge you, and make you a better ring maker.

If you are making hundreds of rings and dumping them in a basket to sell, that’s different. In this case, you are not making custom fittings. However, even those rings will benefit if you get more drills in between the sizes you have, and make more sizes available to your customers.

It’s not difficult to sand the inside of the ring when you get really close with the drill bit. Get as close as you can, and then sand the rest. Arrange a meeting and do a test fitting, then take that information back to the shop to complete the project with a perfect fit.

See Also: Why You Should Make a Bigger Ring Blank

The One Secret to Making Wooden Rings Wrap-Up

Of all the things that prevent a ring from being worn, the fit is the biggest reason. A ring that fits poorly is not fun to wear. It can slip around, get stuck, or fall off for no reason. Instead, put your time into the fit, and the rest will work out.

If you make two rings, a great looking piece that fits poorly, and an average ring that fits really well, the average ring will see more daylight than the better looking ring. If you start with the fit, and then work on the design, you can guarantee more exposure of your work.

The best way to do this is with a test fitting. However, if you can’t, then use a mandrel to get the size dead perfect. Take your time, and make sure that you don’t stop working on the ring until you know that it will fit well.

See Also: The Best Glue for Making Wooden Rings

If you have any questions about The One Secret to Making Wooden Rings that People will Actually Wear, please leave a comment and I will be glad to answer them.  Happy building.

Post Author-

brian forbes westfarthing woodworks llc owner

  • 20 Years Experience in Woodworking
  • 7 Published Books Available on Amazon
  • 750+ Helpful Posts Written
  • 1 Million+ Words Published

You Can Find My Books on Amazon!

woodworking and guitar making books

How do You Hold a Wooden Ring on a Lathe?
AnsweredBrian answered 4 months ago • 
485 views1 answers0 votes
What Tools for Making Wooden Rings?
AnsweredBrian answered 4 months ago • 
330 views1 answers0 votes
Ring Makers Vise?
AnsweredBrian answered 4 months ago • 
299 views1 answers0 votes
Best Drills for Ring Making?
AnsweredBrian answered 4 months ago • 
271 views1 answers0 votes
Rings Splintering When Drilling?
AnsweredBrian answered 4 months ago • 
211 views1 answers0 votes
Different Shape Wooden Rings?
AnsweredBrian answered 4 months ago • 
200 views1 answers0 votes
Can You Put a Diamond in a Wooden Ring?
OpenBrian asked 4 months ago • 
237 views0 answers0 votes
Protect a Wooden Ring?
OpenBrian asked 4 months ago • 
206 views0 answers0 votes
What’s the best wood for making wooden rings?
OpenBrian asked 5 months ago • 
102 views0 answers0 votes

An Exclusive Member of Mediavine Home

Westfarthing Woodworks LLC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.