Where to Find Router Table Plans

  • More than 20 Years Woodworking Experience
  • 7 Woodworking Books Available on Amazon
  • Over 1 Million Words Published About Woodworking
  • Bachelor of Arts Degree from Arizona State University
Buy My Books on Amazon

I receive Commissions for Purchases Made Through the Links in This Post.

This is Where to Find Router Table Plans. There are a couple of different places that you can find good router table plans. I’ll show you several of these, plus a way to do the job yourself. Enjoy.

If You Like My Posts, You'll Love My Books

See My Woodworking Books Here

Router Table Plans

Where-to-Find-Router-Table-PlansA router table is just one of those tools that for some reason is ridiculously expensive. Every single part that you need costs and arm and a leg, and you need several of those parts to bring together to make a nice router table.

On top of that, you can build an entire router table for hundreds and hundreds of dollars, finally get it all assembled and ready, and then realize you still need to buy a router. After all of that, you’re still not done.

Instead of spending a ton of money, you should really consider making a router table yourself following either a set of plans that you buy, a set that you find online, or something that you can make yourself.

See Also: Router Inlay Basics for Beginners

Look Online for a Tutorial

A router table table is honestly not that hard to make. At its most basic level, most routers are adjustable all by themselves, and that means you just need a table to hold them. Just like any other project, start your search online.

Free Woodworking Tips Every Monday

Add Me to the List!

There are so many awesome woodworkers in the world that have no problem posting pictures of their router tables, as well as how they made them, what parts were used, and where you can get them.

The internet is so big, and it’s full of so many things that you can almost find everything you would ever need for free. This is awesome, because it gives you an opportunity to save some money on a tool that’s normally expensive.

Another nice thing is that you can review several different versions of homemade router tables, and come together with your own set of plans based on the parts that you like. Instead of picking a choice out of several, you make your own choice.

See Also: How to Make Router Inlay Templates the Easy Way

Watch Videos of Homemade Router Tables

Another thing that’s really good to supplement finding ideas online is to look for videos dealing with homemade router tables. Some of these will have a video version of router table plans and show you how to make it.

It’s really nice to use video as part of your research, because it clarifies many of the things that aren’t as easy to understand on paper. It’s also just nice to see it happen in real life, that way your brain has an easier time figuring it out.

Definitely do the traditional research, but also watch several videos of people using and demonstrating their homemade rather tables. It will give you a much better understanding of what you are building, and you’ll have a higher chance of success.

See Also: Woodworking Tips Cards – The Router

Free Woodworking Tips Every Monday

Add Me to the List!

Buy a Good Set of Plans Online

If you don’t want to spend time doing all the research, then you might as well just start with a really good set of plans right out of the gate. There are a couple of good sets on Amazon, and they are very nice looking.

The cool thing about a set of plans is that it takes all the design work out of the project. Some people are really good at dreaming things up, other people are really good at building things following directions.

Some are really good at both, which is awesome if that’s you. If it’s not, and you would rather just build something and get it over with, then picking out a set of plans online that are already tested and vetted makes a big difference.

Odds are between the couple sets of plans that are pictured here, you’ll find something that makes sense for your woodworking shop. If one of them speaks to you in this way, by it and check it out, you’ll be glad you did.

See Also: Router Inlay Kit For Easy Inlays

Make Your Own Plans

Another thing you can do is just make your own set of plans. This is what I recommend if you decide to make yours following some design inspiration. Here are a few things to think about though:

If You Like My Posts, You'll Love My Books

See My Woodworking Books Here

  • In the end, the router table just needs to hold the router in a fixed position. That’s the basic goal you need to achieve.
  • You also need some sort of a fence for the router table, but it could be as simple as a board with a nice straight edge that you clamp to the top.
  • The more elaborate you make your design, the harder it is going to be to build. Every single addition means more time.
  • Unless you’re building parts for NASA, you don’t need an overly elaborate lifter mechanism. The one that’s built into your router will be just fine, just use it a little bit more carefully.
  • Make sure that your router table is sturdy, and use at least three-quarter inch plywood all the way around.
  • Consider the position of the router when you install it into the table, because you will need to adjust the height, and you’ll also need to turn it on and off.
  • If you use a secondary switch, you can put the adjustment facing you and not worry about the actual power switch on the router as much.

See Also: A Beginners Guide to Woodworking

Your Action Assignment

Now that you know several different places to get router table plans, it’s time to take what you have read and put it into action. Nothing happens until you actually do something, so it’s time to do just that.

Perhaps you have been after a router table for quite some time but you know that you could sink hundreds of dollars into it. If that sounds like you, you would be surprised how well you can do with a simple router table that you build yourself.

You can even go a little bit more elaborate since you’re building it in your shop, and you’re controlling all of the costs. Maybe you do a hybrid? Buy a couple of things at the store, and then build the rest yourself, which will still save money.

Either way you go, until you start the process, you’ll never finish the process. If you have any questions on router tables, or building router tables, please post a question in the Q&A Forum and I’ll be glad to answer it. Happy building.

Post Author-

  • More than 20 Years Woodworking Experience
  • 7 Woodworking Books Available on Amazon
  • Over 1 Million Words Published About Woodworking
  • Bachelor of Arts Degree from Arizona State University
Buy My Books on Amazon

I receive Commissions for Purchases Made Through the Links in This Post.

 

You Can Find My Books on Amazon!

woodworking and guitar making books
 

Filter:AllOpenResolvedClosedUnanswered
Forum Guidelines (Please Read)
ClosedWestfarthing Woodworks asked 7 months ago • 
799 views0 answers0 votes
Dowel Jig Question
AnsweredWestfarthing Woodworks answered 2 months ago • 
348 views1 answers0 votes
What is a Board Foot?
Answeredsondich answered 1 month ago • 
333 views1 answers0 votes
Should I Use Epoxy for Indoor Garden Plywood
AnsweredWestfarthing Woodworks answered 1 month ago • 
275 views1 answers0 votes
Tru oil curing
AnsweredWestfarthing Woodworks answered 2 months ago • 
228 views1 answers0 votes
Template Routing Replacement Bits
AnsweredWestfarthing Woodworks answered 2 months ago • 
300 views1 answers0 votes
Teekri Wood
AnsweredWestfarthing Woodworks answered 2 months ago • 
219 views1 answers0 votes
String Art
AnsweredWestfarthing Woodworks answered 2 months ago • 
260 views1 answers0 votes
Inquiry About Your Books
AnsweredWestfarthing Woodworks answered 2 months ago • 
401 views1 answers0 votes
Buffing After Finishing an Acoustic guitar with Tru Oil
AnsweredWestfarthing Woodworks answered 2 months ago • 
395 views1 answers0 votes
How to Make a Kitchen Helper Learning Tower
AnsweredWestfarthing Woodworks answered 2 months ago • 
427 views1 answers0 votes
Non Toxic Wood Glue Question
AnsweredWestfarthing Woodworks answered 2 months ago • 
322 views1 answers0 votes
Exterior Wood Door Finish
AnsweredWillieOsgood answered 50 years ago • 
333 views1 answers0 votes
Tea, Vinegar and Steel Wool
AnsweredWestfarthing Woodworks answered 3 months ago • 
447 views1 answers0 votes
Wooden Whiskey “Glass” Buffing
AnsweredWestfarthing Woodworks answered 3 months ago • 
369 views1 answers0 votes
How do I Get Started in Woodworking?
OpenBrian asked 7 months ago • 
182 views0 answers0 votes
Where can I learn some basic hand tool woodworking techniques?
AnsweredBrian answered 6 months ago • 
375 views1 answers0 votes
Can I learn to use chisels on wood by myself?
AnsweredBrian answered 6 months ago • 
378 views1 answers0 votes
My First Mold
AnsweredWestfarthing Woodworks answered 5 months ago • 
405 views1 answers0 votes
Ordering a Catalog?
AnsweredWestfarthing Woodworks answered 6 months ago • 
427 views1 answers0 votes
My Forstner Bit Seems to Wander
AnsweredWestfarthing Woodworks answered 6 months ago • 
443 views1 answers0 votes

An Exclusive Member of Mediavine Home

Westfarthing Woodworks LLC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.